ABE Montereau, video
You are here: Home Nos principaux produits - ABE Transfo - Manufacturer of electric transformers Our products Nos principaux produits - ABE Transfo - Manufacturer of electric transformers Our products Nos principaux produits - ABE Transfo - Manufacturer of electric transformers Pottings - Castings

Pottings - Castings

Characteristics :
Power: 0.2 VA up to 100 kVA (depending on the frequency of use)
Frequencies : 50 to 500 kHz
Voltages : 0.5 V to 50 kV

Fields of use :
-    Dust, moisture protection;
-    Protection against external aggressive agents;
-    Protection against unwanted duplication;
-    Strengthening of the dielectric isolation;
-    Strengthening of the mechanical characteristics.

Applications :
-    Conversion of energies on printed circuit;
-    Source of high voltage power (HVA) in dry configurations (no oil bath);
-    Source of low voltage power with a high insulation (up to 100 kV DC);

These values are given as an example and are not exhaustive of particular solutions.

  • Our recent productions in this range

Trigger

  • ABE transfo, Trigger HT élévateur

  • Type of equipment :

    Lifting trigger HT.

    Impulsive discharge(dump) of a load(responsibility) of condenser transformed and raised(brought up) in a report (relationship) going to 20 times
    Entrance(Entry): 400 V crest
    Exit(Release): 8KV crest
    Frequency: from 1 to 50 KHz over a period of 10 to 20 Hz

    Use :
    Supply an energy adapted to the need for laser and systems of ionization.

    Comments : 

    Strong galvanic insulation > 20 KV
    Low dimensions

    Dimensions : 220 x 160 x 90 mm

    Weight : 2.5 Kg

Three-phase transformer high voltage

  • ABE transfo, transformateur abaisseur MT/BT

  • Type of equipment :
    Three-phase transformer for providing 3x100V 60A from a network 3x11KV.

    Uses :
    Excitation power three-phase motor from a BT MV network (or MT).

    Comments :
    Isolation> 25KV effective. Power on demand up to 18 KVA.

    Dimensions :
    850x550x260 mm

    Weight :
    260 Kg

    HT winding, vacuum impregnation and pressure, vacuum forming and pressure ...

 

Transformer "Forward" High Voltage

  • ABE transfo, Transformer Forward High VoltageTransformateur "Forward" Haute Tension

  • Type of equipment :
    Transformer "Forward" High Voltage (up to 10 KV peak), between 150 and 200 kHz.

    Uses :
    Regulated power point with protective grills subjected to a high electrical potential.

    Comments :
    Non-compliance rate <1 ‰

    Dimensions :
    32x28x25 mm

    Poids :
    0,12 Kg

This product is manufactured in series and uses protocols specific winding and assembly.